Transducer Accessories

MHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth...

Replacement Top Mount f/HDI 83/200/455/800 TMReplacement mount for Skimmer and top housing Specifications:Type: Mounting BracketsBox Dimensions: 3"H x 4"W x 7"L WT: 0.2 lbsUPC: 421945359518

XSONIC Transducer Adapter Cable to HOOK²Adapter cable to connect XSONIC Transducer to HOOK² Specifications:Type: AdaptersBox Dimensions: 1"H x 5"W x 8"L WT: 0.2 lbsUPC: 9420024166963

7-Pin Adapter Cable to HOOK² 4x & HOOK² 4x GPSThis adapter cable adapter any Navico 7-pin transducer to HOOK2 4x Fishfinder or HOOK2 4x Fishfinder with GPS. Specifications:Type: AdaptersBox Dimensions: 2"H x 6"W x...

12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals which are known to the State of California to cause...

CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications:Type: Mounting BracketsBox Dimensions: 2"H x 6"W x 9"L WT: 0.2 lbsUPC: 723193795842

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

10-Conductor In-Line Cable Splice - IP67Airmar CHIRP transducers are made with cables ending in a bare wire connection. Some sounders have internal terminal blocks to which these bare wires can be connected, but many CHIRP fishfinders and sounders use...

Foulfree Transducer CoatingFormulated by industry-leading scientists and certified by Airmar for transducers.  Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also...

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60...

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They...

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use...