Marine Plumbing & Ventilation

Standard Automatic Float Switch - 12/24 VDCThe SHURFLO series float switches provide the ultimate in reliability for your boat. Features: 3' Tinned Wire Assembly Non-Mercury Remote or Direct Mounting Ignition Protected 3 Year Warranty...

Heating Element w/Gasket - Bolt-On Type - 120vThe WH1A-S is a screw in heating element that is 1250w at 120a designed to quickly and efficiently heat the water via electricity in a Raritan water heater.These elements must be installed, and the tank...

1-1/4" NPS NPT Combo Bronze Thru-Hull Fitting with NutFeatures:NPSM / NPT combination threadC83600 BronzeSizes from 1/2" to 5"UL Listed 647BAvailable with (-W) or without nut (-L)BSPP and Stainless Steel models available Specifications:Hose...

Temperature & Pressure Relief Valve1/2" NPT pressure/temperature relief valve for 6 and 11-gallon hot water heaters.Features: Maximum PSI: 100Threads: 1/2" NPT

Nano Touch Solenoid Invensys Kit - 12VThetford's Solenoid Invensys Kit is for use with Thetford's Touch SFT Kits.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or...

3-Way Panel Lighted SwitchControls any pump equipped with an automatic float switch. Toggle has three positions (automatic, off, or manual) and has a "fail safe" spring return to "off" from the "manual" position. Panel is black stainless steel and has...

Locking Fuel Fill Insert(0525)Black Plastic with Zinc Alloy Lock CylinderDual purpose key opens fill cap & locking insertFits most PERKO vented fills Quick Guide (pdf)

Spare Motor for CartridgeUpgrade the output of your bilge pump in a matter of a few minutes by replacing the cartridge. Cleaning debris from the impeller has never been simpler or easier. Specifications:Type: Replacement MotorsBox Dimensions: 4"H x...

3 Way Bilge Pump ControlSwitch panel that gives full control of your equipment. Just push the button for manual or automatic bilge pumping. The automatic feature operates in combination with the automatic bilge switches or the electronic float switch...

Thru-Hull Scupper for Mounting Through TransomFeatures:Molded White PolymerSoft Black FlapperNut and Mounting Hardware IncludedSpecifications:Hose Size: 1-1/2"Mounting Hole Diameter: 1-7/8"Max. Hole Thickness: 2-1/8"O.D. Flange: 2-7/8"...

Compact SeatOriginal wooden seat for Compact and Design models. Features:Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance 

1/4" NPT #316 Stainless Steel In-Line Ball ValveFeatures:1-1/4" sizes and larger include a grease zerk fitting for lubrication (use only with the valve in the open position) or for drainingHandle has square hole to accept standard ratchet (helps you to...